Starting at ￡279/mo. 3 Mo. 0% APR with Klarna/Paypal
Laser Engraving with High Accuracy
Adopted industrial grade structural design, the laser engraver xTool D1 Pro's processing accuracy reaches 0.01 mm incredibly. With 0.08*0.06mm ultra-fine compressed laser spot, xTool D1 Pro always shows the best details whether in engraving or cutting.
Ultrafine Engraving Line Thickness
Smaller laser focus (from 0.15*0.15mm to 0.08*0.06mm) and tiny engraving line width makes for impeccable details, thanks to the compresssed-spot technology.
Higher Accuracy DIY Laser Engraving & Cutting Machine
Largely Improved Engraving Motion Accuracy
By tightening the synchronous belt with the tension wheel adjuster, the all-steel wheels and shafts on xTool D1 Pro help reduce fractions and increases the laser engraving and cutting accuracy to 0.01mm. They last for 100,000 + times of sliding, triple the lifespan of plastic ones.
The Best Laser Engraver with the Highest Motion Accuracy
Engraving/cutting accuracy to reach 0.0004 inches
Repositioning accuracy down to less than 0.0007 inches.
100% Reprint Your Laser Engraving Ideas
Enhanced Engraving and Cutting Finish
Use innovative dual laser technology to combine two laser beams into one spot. The compressed spot has higher power, higher cutting ability, faster speed, and better effects under the same electric power. The power of 10W dual laser xTool D1 is equivalent to a single laser 15W laser engraving/cutting machine.
Wood & acrylic cutting in one pass
Stainless steel metal engraving
Upgraded Laser Engraver Software
Get started quickly with our user-friendly software: XCS
Updating Project Files
Batch Processing with Circular Array
Default Working Parameters for Materials
xTool Creative Space
Compatible with mature engraving software: LightBurn
The layout, editing, and control software for common laser engraving machines. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.
LightBurn User GuideHigher Productivity at Higher Speed
Invigorate Your Engraving Projects with 340+ Colors
Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal and making your laser engraver projects more vivid and colorful.
Adjusting Laser Focus Easily and Precisely
Easy Laser Focus Adjustment
It only take 3 steps to adjust the laser engraver focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, and recover the focus lever.
Limit Switches in All Directions
Limit switches will trigger the alarm if the moving laser head is about to hit the boundary of the machine rails in all directions.
Flame Detection for Safer Laser Engraving
The emergency stop will be triggered by the detection of flames, smoke and tipping, and the cutting and running will be immediately paused in case of further damage.
More Refined Details for Better Engraving Experience
New Protective Design for Laser engraver
New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.
Larger Engraving Area
A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
Large Engraving Area
A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
The Risers
Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
Just Connect
You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.
Just Connect
You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 anytime and anywhere.
Your Laser Creativity Further Expanded
xTool RA2 Pro
Super versatile rotary compatible with most cylinders and spheres.
Air Assist
Get less burn mark during engraving and cutting
Extension kit
Expand your working area to 936*432mm
xTool enclosure
Foldable and protective enclosure for sale engraving
xTool D1 Pro Unboxing & Reviews
Limited-time 0% APR!
Pay monthly in 3 steps; no fees, no interest, no regrets. | affirm
1. Select affirm at checkout
2. Enter a few info.
3. Pay over time
Spread holiday cheer
with a customized gift card
Customize an e-gift card for friend or relative, record a video or write a text
message of your wishes, make sure they share your festive mood.
ALREADY HAVE A GIFT CARD? CHECK YOUR BALANCE >>
Laser Machine Spec Comparison
| Type | xTool D1 Pro-20W | xTool D1 Pro-10W |
|---|---|---|
| Machine Power | 120W | 60W |
| Laser Electric Power | 84W | 40W |
| Laser Module Output Power | 20W | 10W |
| Laser Spot | 0.08*0.10mm | 0.08*0.06 mm |
| Working Area | 430 * 390 mm (16.93 * 15.35 inches) | 430*400 mm(16.93*15.75 inches) |
| Working Area With Extension Kit | 920*430mm(36.22*16.93 inches) | 930*430mm(36.61*16.93 inches) |
| Max. Workpiece Height | 50 mm (2 inch) | 50 mm (2 inch) |
| Max. Workpiece Height with X risers | 50mm+X*45mm（each set riser height column） | 50mm+X*45mm（each set riser height column） |
| Connecting Interfaces | USB/Wi-Fi/TF Card | USB/Wi-Fi/TF Card |
| Certification | FCC / FDA / CE | FCC / FDA / CE |
| Operating Systems | Windows/macOS | Windows/macOS |
| Control Software | xTool Creative Space / LightBurn | xTool Creative Space / LightBurn |
| File Type(s) | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. |
| Routing Speed | 400 mm/s | 400 mm/s |
| Compatible Accessories | RA2 Pro Air Assist Set xTool Smoke Purifier Honeycomb Working Panel Set Enclosure | RA2 Pro
Air Assist Set xTool Smoke Purifier Honeycomb Working Panel Set Enclosure |
Compare S1 with D1 Pro
xTool S1
Enclosed Diode Laser Cutter
xTool D1 Pro
Open Frame Diode Laser Cutter
Flame Detection
5 direction flame detection, wider flame detection，higher ability to detect fire.
A flame detection
Eyes Protection
No need to wear safety goggles.Machine will auto stop while opening the lid.
Must wear safety goggles to operate or watch the process.
Work Enviroment
Indoor, direct smoke straight to the windows.
Recommend to use in an open room or buy an enclosure to direct smoke to the windows.
Clean
Keep work place clean
May get dusty when cutting without an enclosure
Focus
Dynamic auto focus, perfect on uneven surfaces, more user friendly.
Manual focus
Positioning Method
Accurate positioning for multi-shape objectsincluding circular positioning, twin-point positioning and polygonal positioning.
Red Cross positioning/Laser spot, can only position the starting point.
Speed
600mm/s, save more time.
400mm/s
Work area
498*319 mm
430 x 390 mm
Spot
0.08*0.10mm 40W Diode Laser0.08*0.06mm 20W Doide Laser
0.10*0.15mm 40W Diode Laser0.08*0.10mm 20W Diode Laser
Batch marking
No Jigs needed, support multiple-shape marking
Support batch marking, doesn't support multiple-shape batch marking.
Assembly
Pre-assembled
Need to assemble
Cable organization
Cable track
Zip tie
Accuracy
0.01mm
0.01mm
Connection
USB/Wifi
USB/Wifi
Max work height
With riser base 125mm (without riser base:42mm)
With 2 sets of risers 140mm (without riser 50mm)
FAQ
