It can remove rust and paint automatically. This nozzle is installed on the MetalFab CNC cutter. The handheld cleaning nozzle for the welding machine can be found at the following link. This set is only for spare use. The MeatlFab...

This add-on set includes 2 double-layer nozzles (1.0mm & 1.2mm) and a focus extension tube (20mm). It is mainly used for cutting carbon steel and galvanized sheets with a thickness of 2mm or more. For thicknesses below 8mm, a 1.0mm...

This set includes a wired welding nozzle, a wireless welding nozzle, a handheld cutting tip, and a handdled cleaning nozzle. It is suitable for laser welding, cleaning, and handheld cutting. This set is only for spare use. The MetalFab laser...

This set includes 5 metal slats for securing the sheet material.  When cutting thin sheets of 1mm or below, please lay all slats to provide adequate support, preventing vibration and waviness during cutting. This set is only for spare use....

This set includes a SaveGas™ cutting nozzle(also called as telescopic cutting nozzle) and 10 ceramic rings for replacement. Cut thick metals such as 4mm stainless steel, 4mm aluminum, 3mm brass with an air pressure of only 87 PSI (0.6 MPa)....

This set includes 10 protective lenses for the xTool MetalFab welding gun.It is advisable to check, clean or replace the protective lens after continuous use for 3-6 days.This set is only for spare use. The MetalFab laser welder package has...

The ordinary cutting nozzle is primarily used for precise cutting stainless steel, brass, aluminum, galvanized sheets, and carbon steel. For metals below 1mm, you can use this ordinary nozzle with only 0.6 MPa gas pressure. For thicker stainless steel, brass,...