Ring Laser Engraving: How to Engrave a Ring with RA2 Pro

by Winnie Li Posted in December 14, 2022

Nowadays, engraved rings are quite popular and preferred over common rings. People love to have their names, special dates, tag lines, titles, and other texts engraved on the ring.

Engraving gives a special meaning, distinct look, and certain memories to the rings. Therefore, people prefer to wear engraved rings and present them to their loved ones.

rings with laser engraved names

Whether you want to engrave rings for yourself, loved ones or your clients for business purposes, you need to learn how to do it correctly. 

In terms of perfect engraving results, laser engraving is a commendable way of engraving a ring due to its ultra precison. But it is not as easy as engraving flat objects because of its shape. It requires special attachments, extra precision, and some expertise to get the job done with perfection.

In This Article

  • Can You Laser Engrave Rings?
  • How to Set Up Rotary Attachment 2 Pro for Ring Laser Engraving?
  • How to Engrave a Ring?
  • Final Words

Can You Laser Engrave Rings?

Yes. When engraving a ring with a laser engraver, a rotary attachment is needed to rotate the ring 360 degrees during engraving, making sure the graphic is engraved evenly on every side and corner.

Keep in mind that common rotary attachments are not suitable for rings because they cannot hold the ring in place and keep it stable. There is a special ring rotary that has special studs to hold the ring.

xTool Rotary Attachment 2 (RA2) Pro is a 4-in-1 rotary attachment that works as a ring rotary, sphere rotary, roller rotary, and chuck rotary. It is an all-in-one attachment that can be transformed into anyone required.

xTool's Rotary attachment pro has 4 working model including ring rotary

It can work in 90% of the cylindrical and spherical engraving scenarios and has eliminated the headache of engravers. Its special ring rotary is just perfect. It can engrave rings having a diameter in the range of 11mm-70mm. Furthermore, it's capable of engraving both inside and outside of a ring.

outside ring laser engravinginside ring laser engraving

4-in-1 Rotary Attachment for Laser Engravers

xTool RA2 Pro

Price:

Learn More > >

How to Set Up Rotary Attachment 2 Pro for Ring Laser Engraving?

RA2 Pro comes pre-assembled, but it is a roller rotary. So, if you want to change it into a ring rotary, you need to assemble it accordingly. All parts of the ring rotary are available in the box, so you only need to fix them in the right place. Plus, you will also find the tools required for the assembly.

Here are the step-by-step instructions to assemble the ring rotary.

Step 1: Disassemble the Rotary Drive Shafts 

The roller rotary of RA2 Pro is pre-assembled. So, we have to take out the extra parts first before fixing the parts of the ring rotary. First, you need to disassemble the two slave-drive shafts of the rotary.

disassemble the rotary drive shafts

Turn the rotary upside down and loosen the screws of the shaft. There will be two screws at the bottom plate. Loosen both of them and take out the adjustable slave-drive shaft.

Now, you need to remove the second slave-drive shaft. It also has two screws on the coupling. Remove the first screw and then turn the shaft a bit to remove the second one. Once the screws are out, take out the shaft.

remove the second drive shaft

Step 2: Attach the Belt Pulley to the Motor Shaft 

At this stage, we have taken out the extra parts from the rotary. Now, we need to fix the parts required for the ring rotary. First, rotate the shaft coupling until its flat face faces downward. Then, attach the belt pulley to the motor shaft. Turn the attachment upside down and tighten two screws. You might need to turn the shaft to install the second screw.

Step 3: Assemble the Chunk Rotary

For making a ring rotary, we need to make the chuck rotary first. Once the chuck rotary is ready, we need to attach the ring studs. So, we will assemble the chuck rotary. Put the belt on the pulley and place the chuck on the attachment. Attach the belt to the chuck. Finally, you need to insert two M4*20 screws to fix the chuck.

Step 4: Assemble the Ring Studs

Once the chuck is installed, you need to put the stud components. These components hold the ring in its place. You can tighten the studs with your finger; there is no need for a tool.

Now, the ring rotary is ready. You can start engraving rings.

How to Engrave a Ring?

xTool D1 Pro is a high-precision diode laser engraving machine for ring engraving. It is perfect for beginners, laser engraving businesses, DIY lovers, professionals, and artists. If you want to start an engraving business, it could be the right choice. You only need to follow a few simple steps to get the ring engraved.

laser engraved rings

Step 1: Connect the Laser Engraver with Software

Get your xTool D1 ready. Turn it on and connect it to your computer. Open xTool Creative Space and make sure the machine is connected with the software.

Step 2: Increase the Height of the Laser Machine

For rotary attachment, you need to increase the height of D1. You can use risers to increase the height as much as needed.

Step 3: Measure the Ring

Place the ring rotary in the engraving area. Measure the width and circumference of the ring. Some materials can be directly engraved, but some require tempera paint, transfer tape, or cold galvanizing compound.

You can apply that if needed before placing the ring. After that, place the ring on the ring studs and tighten the chuck using the key. The ring should be in its proper place to rem