Pay ￡1, you will receive two coupons via email.Pleaser check your email after paid.
- ￡500 off the AP2 Air Purifier (final price ￡499)
- ￡50 off the IF2 Inline Fan (final price ￡109)
Final Payment Period: Oct. 21 - Oct. 25 
*Please note that the ￡1 payment is non-refundable.

This purifier features a cyclone layer, significantly extending the lifespan of the filter compared to others. As a result, the frequency of replacements is reduced, leading to lower maintenance costs.

If you're using a fan as an exhaust fan in an open space (no resistance), then you should focus on CFM. However, if you're connecting the fan to a laser machine (a space with resistance), what matters more is the suction power for smoke extraction and the airflow speed inside the exhaust duct. The internal environment of a laser machine is relatively enclosed, so the greater the suction power, the better the smoke extraction; the faster the airflow, the quicker the smoke will be expelled. Just like a vacuum cleaner, where the focus is on pressure rather than CFM. The greater the pressure, the more thoroughly it cleans.

A traditional 6-inch duct fan with 410 CFM will lose a lot of airflow because the laser exhaust aperture is only 3 inches, resulting in a loss of overall performance. The IF2 fan is 3 inches, matching the laser machine perfectly, so there's no size mismatch and performance is guaranteed.

Users who have purchased the P2S machine do not need to buy the xTool SafetyPro™ IF2, as the P2S has upgraded its built-in exhaust system to utilize the same technology as this fan.

All xTool laser models are compatible with this purifier (P2S/P2/F1 Ultra/S1/M1 Ultra/M1/F1/D1 pro/D1). Additionally, it can also be used with laser machines from other brands, but you’ll need to get a custom adapter yourself.